Samsung UE40C6510 – 40” Full HD LED TV

Video Resolution = 1920 x 1080
Feature Internet@TV =Yes

Audio
Dolby Dolby Digital Plus / Dolby Pulse + SRS TheaterSound
DTS 2.0 + Digital Out = Yes
Speaker Type Bottom – Output (RMS) = 10W x 2
Woofer = Yes

Input & Output
Component In (Y/Pb/Pr) = 1
Composite In (AV) = 1 (Common use for Component Audio In)
Digital Audio Out (Optical) = 1
DVI Audio In (Mini Jack) = 1 (Common Use for PC Audio in)
Ethernet (LAN) = 1
Headphone = 1
HDMI = 4
PC Audio In (Mini Jack) = 1
PC In (D-sub) = 1
RF In = 1
USB (HDD + Movies + WiFi adapter ) = 2
CI Slot = 1
Scart = 1

Dimension
Set Size (WxHxD) with Stand = 959 x 651 x 270mm
Set Size (WxHxD) without Stand = 959 x 588 x 29.9mm
VESA = 400 x 400

Weight
Set weight with stand = 14.7kg
Set weight without stand = 12.3kg

Manual online
Firmware online

More information at Samsung Italia website

WD TV Live – New firmware + Communites

HW

  • CPU = Sigma Design SMP-8655AD
  • Clock CPU = 500Mhz
  • Flash = 128 MByte
  • RAM = 512MByte DRAM

Firmware

Website

Forum

Wiki

WDLXTV-Live Firmware

WDLXTV-Live is a souped up unofficial firmware for the Western Digital WD TV Live. It is based off of the 1.02.21 firmware, but with many extra features. This is a permanent flash, just like an official upgrade. It enables a wide range of extra functionality which is missing from the official firmware, such as bittorrent, webserver, NZB, SSH, FTP, NFS, etc.

Different Version

  • Normal = The Normal version requires Flashing the Firmware into the WDTV Live
  • Minimal = The Minimal version is the same as the Normal version, but without php, python, perl, nzbget, deluge, lighttpd
  • Ext3 = This version is used for testing purposes. It is identical to the normal flashed version. The main difference is that ext3-boot-live is pivoted into and run directly off your external device. This means ext3-boot-live gives you full read/write permissions.

To flash firmware
Place wdtvlive.bin on a memory stick along with wdtvlive.ver and insert it into your WDTV Live.
When asked if you want to upgrade your firmware, say yes.
The WDTV Live will reboot and after several minutes the whole flashing process will complete and reboot again.
Upon successful flash you will see WDLXTV_Live in the about screen of system settings.
The firmware no longer needs to be on anything attached to the WDTV Live.
Downgrade instructions are always provided at the bottom of the README which is included in every release’s zip.

Alice Gate VoIP 2 Plus Wi-Fi AGPF_4.5.0sx – Rollback to 4.4.2 + Change the settings

Follow this guide to install 4.4.2:
http://www.ilpuntotecnicoeadsl.com/forum/index.php/topic,10572.0.html

+ this guide:
http://inglele.blogspot.com/2009/02/dd-wrt-on-alice-gate-voip-2-plus-wi-fi.html

Enable VOIP
Enable VOIP line
Discus> conf set /voip/line/0/enabled 1
Discus> conf set /voip/line/1/enabled 1
Discus> conf reconf 1

Add PPPOE Connection
usage: pppoe add dev [vpi vci encap {LLCVCMux}]

type:
connection pppoe add aliceadsl aliceadsl WANETHoA

Then save new discuss.conf and lookfor “ppp2” select from ( … to … ) and overwrite with this one to enable auto connection to web:

(ppp2
(enabled(1))
(logical_network(1))
(type(pppoe))
(has_ip(1))
(is_sync(0))
(is_dns_neg(1))
(mtu_mode(1))
(default_route(0))
(route_level(1))
(rip
(enabled(0))
)
(mcast
(igmp_proxy_default(1))
(version(3))
)
(is_trusted(0))
(dyn
(override_netmask(0.0.0.0))
(use_override_netmask(0))
)
(static
(ip(0.0.0.0))
(netmask(0.0.0.0))
(gateway(0.0.0.0))
)
(ppp
(auth
(pap(1))
(chap(1))
(ms_chap_v1(1))
(ms_chap_v2(1))
)
(reconnect_time(30))
(compression
(bsdcomp(1))
(deflate(1))
)
)
(max_idle(600))
(is_clamp_mtu(1))
(is_on_demand(0))
(depend_on_name(ethoa0))
(ppp_lcp_echo(120))
(ppp_lcp_echo_retry(4))
(id(12))
(description(Alice ADSL))
(connection_type(IP_Routed))
(nat_enable(1))
(nat_service(Generic))
(username(aliceadsl))
(password(&b7;`X&b3;&99;&0b;S&de;&c1;))
(dns_override(1))
(name_server
(0(151.99.125.1))
(1(151.99.0.100))
)
(connection_trigger(X_TELECOMITALIA_IT_Conditional))
(nat_pers_time(300))
(alias)
(dhcps(lease))
(cwmp_id())
(service_name())
(metric(1))
(is_unnumbered(0))
(ppp_open_session
(ppp_session_id(9482))
(ppp_server_addr(00:19:55:4c:7d:4a))
)
)