Tesla Model 3 + HAM Radio antenna

IMG_20181125_145549

DIAMOND K400CNMO Trunk/Hatchback Mount

NR770HNMO Dualband Mobile Antenna

  • Bands: 2m/70cm
  • Gain dBi: 3.0/5.5
  • Watts: 200
  • Height: 38.2″
  • Mount: NMO
  • Element Phasing: 1-1/2 Lambda, 2-5/8 Lambda

Antenna is installed on right side of car connect to trunk edge via K400.

K400 0978dia2

Cable is routed as follow:

  1. Under the moving part of trunk toward front of car (photo #1)
  2. U turn back down to bottom of fixed part around the rubber insulation used to protect wiring in the truck (photo #2 and #3)
  3. Inside trunk and stick on top of it to avoid any hanging (photo #4 and #5)
  4. Move down following the back of right seat and around the seating part (photo #6, #7 and #8)
  5. Under all weather floor mat to the area between central console and front passenger seat (photo #9 and #10)

This slideshow requires JavaScript.

If you want to route the cable completely hidden, you will need a Diamond C110 extension cord and follow this video on how to tear down your Model 3:

Advertisements

TYT TH-9800 and HAM Radio Go-Kit

IMG_20181123_132119

TYT Official

Power Distribution

Antenna

Programming Software

Firmware Options

  • Turn off radio via normal power button
  • Press left LOW button AND power button, to enter firmware mode
  • Radio will boot in firmware mode: “F1 – SETMOD RESET” on display
    • Press A = MAIN UPDATE
    • Press B = PANEL UPDATE
    • Press F = RF Test mode
    • Press Set = Reset radio settings (keep channels memory)
  • Left/Right Dial scroll, switch between mode =
    • F1 = SETMOD RESET
    • F2 = HYPER RESET
    • F3 = MEMORY RESET
    • F4 = ALL RESET
    • F5 = M_ONLY MODE

MAIN UPDATE mode is used to fix TYT TH-9800 Firmware Update “Busy Lock” which requires a full firmware update.

Reviews

User Group