Multimedia Home System – Streaming using DLNA protocol

See latest version at Cacoo.com

More information about DLNA and UPnP

WDTV Live doesn’t support DLNA streaming on official firmware.
You need to install WDLXTV firmware, but this doesn’t include DLNA server but only client

To get DLNA server on WDLXTV you need to install a TwonkyMedia v4.4.18 -> note this SW is not FREE but you need to buy a copy at Twonky website

Boston Acoustic – SoundWareXS 5.1


It’s available the DataSheet and Product Manual at the website with the full specifications:

  • Satellites =
    Frequency Response: 150 Hz – 20 kHz
    Recommended Amp Power: 10 – 100 watts
    Nominal Impedance: 8 ohms
    Sensitivity: 85 dB [SPL/2.8v at 1 m]
    Woofer: 2½”
    Tweeter: ½”
    Crossover Frequency: 5 kHz
    Net Weight: 0.5 kg
    Dimensions (H x W x D): 94 x 87 x 113 mm
  • Subwoofer =
    Frequency Response: 50 – 150 Hz
    Amplifier Power: 100 watts
    Woofer: 8” (203 mm)
    Crossover Frequency: 60 Hz – 180 Hz
    Net Weight: 9 kg
    Dimensions (H x W x D): 377 x 284 x 310 mm

They are avaiable at BOW website for €600

WD TV Live – New firmware + Communites

HW

  • CPU = Sigma Design SMP-8655AD
  • Clock CPU = 500Mhz
  • Flash = 128 MByte
  • RAM = 512MByte DRAM

Firmware

Website

Forum

Wiki

WDLXTV-Live Firmware

WDLXTV-Live is a souped up unofficial firmware for the Western Digital WD TV Live. It is based off of the 1.02.21 firmware, but with many extra features. This is a permanent flash, just like an official upgrade. It enables a wide range of extra functionality which is missing from the official firmware, such as bittorrent, webserver, NZB, SSH, FTP, NFS, etc.

Different Version

  • Normal = The Normal version requires Flashing the Firmware into the WDTV Live
  • Minimal = The Minimal version is the same as the Normal version, but without php, python, perl, nzbget, deluge, lighttpd
  • Ext3 = This version is used for testing purposes. It is identical to the normal flashed version. The main difference is that ext3-boot-live is pivoted into and run directly off your external device. This means ext3-boot-live gives you full read/write permissions.

To flash firmware
Place wdtvlive.bin on a memory stick along with wdtvlive.ver and insert it into your WDTV Live.
When asked if you want to upgrade your firmware, say yes.
The WDTV Live will reboot and after several minutes the whole flashing process will complete and reboot again.
Upon successful flash you will see WDLXTV_Live in the about screen of system settings.
The firmware no longer needs to be on anything attached to the WDTV Live.
Downgrade instructions are always provided at the bottom of the README which is included in every release’s zip.